window install

Success! A new t-slider window from Motion Windows. Check out the process below:


I used my angle grinder to cut a thin line so I could insert the blade of my jigsaw into the opening. It worked great!

Remember to cut the top line last. Add reinforcement tape on the outside to all sides of the window before the final cutout. I used duct tape to be sure the heavy sheet metal didn’t fall off and cut my foot. You can see the black duct tape I used in the video above.

Here is the video I used to guide my window installation. Remember to spray the outside of your van with window cleaner before you slip it in for the final install. This allows you time to adjust the position without creating a fold in the seal and without the window getting stuck in the wrong position.

Let us know if you have any questions!

%d bloggers like this: